Kidde strongly recommends that both ionization and photoelectric smoke alarms be installed to help insure maximum detection of the various types of fire that can occur within the home. Part Number (Ordering Number):0919-9999. Power Source: 3 AA batteries. Audio Alarm: 85dB at 10ft. Temperature Range:
The Kidde Smoke + Carbon Monoxide Alarm with smart features also comes hardwired with a 10-year backup battery, so you don’t have to change it at all. At the end of 10 years, you simply replace
Hard Wired Smoke Alarms. Hard wired smoke alarms are mains-powered and include a battery as a backup in case of a power failure. As it’s unlikely that both the power and battery will fail at the same time, hard wired smoke alarms offer an extremely reliable form of protection. Furthermore, because hardwired smoke alarms are connected to the This alarm has not been investigated for carbon monoxide detection below 50 PPM. This alarm requires a continuous supply of electrical power – it will not work without power. WARNING: THIS CARBON MONOXIDE ALARM IS NOT A SUBSTITUTE FOR INSTALLING AND MAINTAINING AN APPR OPRIATE NUMBER OF SMOKE ALARMS IN YOUR HOME. THIS ALARM WILL NOT SENSE Tests start at 30 parts per million (ppm) of carbon monoxide. At this low level, the alarms shouldn’t trigger. We then test them at 50ppm, where they should go off after between 60 and 90 minutes. Our third test is at 100ppm, when they should sound after between 10 and 40 minutes. Finally, we raise the level of carbon monoxide to 300ppm.
Depending on the device (check your manual), a regular flashing red light is a visual indication that the smoke alarm is working properly. Depending on the brand, it may be flashing every 10 seconds, other brands, and it may be every 30 seconds, and so on. It also indicates that a working battery is connected to the smoke alarm.
